RFID Tae Tag Installation: Bonding, Akenkan Adwumayɛ Ne Mapping

RFID tae tag bɛyɛ mfasoɔ berɛ a honam fam instɔlehyɛn, radio-frequency aba ne software identity no da so ara wɔ abusuabɔ nko ara.

Tag betumi ayɛ ho biribi wɔ adwumayɛbea bi so na ɛda so ara adi nkogu bere a wɔde abɔ mu liner no ho, de ahyɛ ntwahonan so anaasɛ wɔde akyerɛ baabi a wɔkenkan ade a wɔde wɔn ankasa yɛ adwuma akyi. Ɔhaw a ɛne eyi bɔ abira no yɛ aniberesɛm saa ara: tag no kenkan yiye, nanso ne EPC no bue tae ho kyerɛwtohɔ a ɛnteɛ anaasɛ ɛkɔ so de hyɛ ntwahonan gyinabea dedaw bi mu.

Mmuae ntɛm:Pene tae a wɔde ahyɛ mu no ho kyerɛwtohɔ so, na ɛnyɛ tag a ɛho ayɛ hare no. Freeze tae, tag, bonding nhyehyɛe, akenkanfo nhyehyɛe ne encoding mmara; hwɛ sɛ tag no yɛ nokware ansa na wode ahyɛ mu, bere a woabɔ no awie, bere a wode ahyɛ ntwahonan no mu akyi ne beae biara a wɔkenkan adwuma no; afei si so dua sɛ identifier a wɔasan de aba no map kɔ tae nkwa nna ho kyerɛwtohɔ a ɛfata so.

Akenkanfoɔ a wɔda so ara de frequencies, tag formats, TPMS integration ne business use cases toto ho no, ɛsɛ sɛ wɔfiri aseɛ deRFID tae tag akwankyerɛ a edi mũ. Saa asɛm yi twe adwene si installation control ne acceptance testing so bere a adwuma no apaw obi a ɔpɛ sɛ ɔyɛ adwuma no akyiRFID tae ho nkyerɛwde.

Saa akwankyerɛ yi yɛ quality-control framework. Ɛnsesa tae-ɔyɛfoɔ akwankyerɛ, nsiesie kwan a wɔapene so, tag a ɔde ma no attachment specification anaa adwuma a tae adwumayɛfoɔ a wɔfata yɛ.

Tew Gyinapɛn Sɔhwɛ Fi Dwumadi a Wogye Tom Ho

Amanaman ntam gyinapɛn boa ma wɔkyerɛkyerɛ tae-tag mfiridwuma, coding ne RF susudua a wɔde toto ho. Wɔnkyerɛkyerɛ adwumayɛbea a wɔde besisi hɔ, po so ahyɛn no adwumayɛ akenkan nsɛntitiriw anaasɛ mpɛn dodow a wɔfa nhwɛsode ma ade a wɔkra kɛse.

ISO 20912 nso ka sɛ nea efi mu ba a wɔde toto ho no hwehwɛ sɛ radio-frequency ne power parameters koro no ara. Ɛno nti na ɛsɛ sɛ sɔhwɛ kyerɛwtohɔ bi kora nnwinnade ne geometry so, na ɛnyɛ kasasin "tag passed" kɛkɛ.

Ɛsɛ sɛ wɔhwɛ gyinapɛn a wɔatintim no mu sɛ ebia mprempren nkyerɛase ahorow no wɔ bere a wɔretɔ nneɛma no efisɛ gyinapɛn ahorow no betumi akɔ nhwehwɛmu anaa nsakrae kyinhyia ahorow mu.

Paw Installation Scope a Ɛteɛ

Embedded ne Aftermarket Tire-Nsɛm a Wɔde Kyerɛkyerɛ

Wɔde factory-embedded tag ahyɛ mu bere a wɔreyɛ tae. Ne nhyehyeɛ, ne gyinabea ne ne ayaresa kwan no yɛ tae-yɛyɛ ho nkyerɛkyerɛmu no dea. Wɔde inner-liner patch anaa sticker a wɔapene so abata ho bere a wɔayɛ no awie na ɛhwehwɛ sɛ wɔyɛ adwuma a wɔahyɛ so anaasɛ wɔde siesie no foforo.

Amansan kwan biara nni hɔ a wɔde besi hɔ, adhesive anaa bere a wɔde sa yare a ɛfata ma tae ne tag biara. Ɔkwan a wɔakyerɛw a wɔfa so yɛ tae, attachment ne bonding nhyehyɛe pɔtee no da so ara yɛ akwankyerɛ a ɛhwɛ so.

Mfa Wheel-Associated Identifier Biara nni dwuma sɛ Tae Tag

Tag a wɔde ahyɛ rim, valve anaa TPMS fã bi so no betumi aboa ntwahonan anaa kar no sohwɛ, nanso ɛnyɛ nea egyina hɔ ma tae no aduru a ɛbɛtra hɔ daa no ara kwa. Nea ɛde bata ho, mfiri a ɛda adi, ɔkwan a wɔfa so yi fi hɔ ne asetra mu kyinhyia yɛ soronko.

Ansa na wobɛkyerɛw sɔhwɛ nhyehyɛe no, ka sɛ ebia nea ɛkyerɛ sɛ obi hu no yɛ:

• Tae no ankasa
• Ntwahonan anaa rim no
• TPMS sensor bi a ɛwɔ hɔ
• Bere tiaa mu nneɛma a wɔde kɔ baabiara

Ɛno nkutoo na adwuma no betumi akyerɛkyerɛ kyerɛwtohɔ a ɛsɛ sɛ ɛkɔ so tra hɔ daa bere a wɔasesa tae, rim anaa sensor no.

Freeze Nsiesiei a Wɔapene So ne Sɔhwɛ Nhyehyɛe no

Nea efii mu bae a wɔakyerɛw sɛ "UHF tag passed" no, wontumi nsan nyɛ bio sɛ ​​tae no mfonini, patch batch, antenna, akenkanfo ahoɔden ne ntwahonan tebea no nni hɔ a. Kyerɛw nhyehyɛe biako a wɔapene so ansa na wimhyɛnkafo no aba na fa nsakrae a ɛba akyiri yi no sɛ nsakrae a wɔahyɛ so.

Syntek nsɛm a wɔka fasɛnea RFID yɛ adwumakyerɛkyerɛ abusuabɔ a ɛda tag, akenkanfo ne softwea ntam. Wɔ tae adwuma mu no, sɔhwɛ taa gyina UHF mfiri a ɛnyɛ adwuma so, enti nea wɔapaw noUHF RFID akenkanfoɛsɛ sɛ wɔde ka nhyehyɛe a wɔapene so no ho sen sɛ wɔbɛfa no sɛ nnwinnade a wotumi sesa.

Di Identifier no so Ansa na Wobɛhyehyɛ

RAIN Alliance no deɛtae ho akwankyerɛ a wɔde kyerɛkyerɛkyerɛ mu sɛ ISO 20910 de 96-bit SGTIN-96 di dwuma sɛ ade soronko a ɛkyerɛ tae a RAIN tumi yɛ adwuma na ɛma akwankyerɛ a ɛfa dwumadie ho ma serialization, EPC memory ne commissioning.

Ɛsɛ sɛ adwuma no hwɛ sɛ EPC no yɛ soronko na ɛdi nɔma nhyehyɛe a wɔapene so no akyi. TID a ɛkyerɛ tag chip anaa chip type sɛnea wɔde di dwuma no betumi de nhwehwɛmu foforo ama atia nsakrae a wɔnhwɛ kwan, nanso ɛnsɛ sɛ wɔde kyerɛ sɛ tae-nkwa kyinhyia kyerɛwtohɔ a edi mũ.

Syntek nnianim asɛm a ɔdeƐlektrɔnik Nneɛma a Wɔde Yɛ Adwuma Mmarabetumi aboa akenkanfo a wohia nkyerɛkyerɛmu titiriw ansa na wɔakyerɛkyerɛ encoding fael no mu.

Hwɛ Tae no mu na Di Bonding Process no so

Scan na Hwɛ Ansa na Woahyɛ Mu

Scan tae no ansa na wode ade foforo a ɛkyerɛ sɛnea tae no bɛtra hɔ daa aka ho. Ebia wɔrenhu tag a wɔde ahyɛ mu dedaw, na EPC a ɛto so abien a ɛyɛ adwuma betumi ayɛ nsɛm a esisi a ɛto so abien, nsiesie abakɔsɛm a ɛbɔ abira ne kar ho mfonini a ɛnteɛ.

Mfa tag nhyɛ nneɛma a asɛe anaa wɔasiesie so gye sɛ tae ne akwankyerɛ a ɛfa sɛnea wɔde bɛka ho no ma ho kwan pefee. Asɛm no ntumi nkyerɛ sɛ ebia nipadua mu tebea bi yɛ nea asiane biara nni ho; saa gyinaesi no yɛ tae ho nhyehyɛe a ɛfata no dea.

Ma Bonding Record no nyɛ nea wobetumi ahwehwɛ

Sɛ wopɛ inner-liner patch a, ɛsɛ sɛ instɔlehyɛn kyerɛwtohɔ no ka tae, tag, nneɛma, mfiridwumayɛfo ne ɔkwan a wɔfa so yɛ no bom.

• Tae identifier ne beae a wɔapene so sɛ wɔde besisi
• Tag EPC ne TID check wɔ baabi a ɛho hia
• Patch anaasɛ enclosure batch
• Bonding-material batch wɔ baabi a ɛfata
• Nneɛma a wɔde siesie nneɛma na wɔde siesie nneɛma
• Ɔkwan a wɔfa so yɛ no mu nsakrae
• Mfiridwumayɛfo anaa adwumayɛbea
• Installation ne ayaresa bere nsɔano
• Nneɛma a atwa yɛn ho ahyia tebea horow a wɔhwehwɛ
• Mfomso ahorow a wotumi hu, adwuma a wɔsan yɛ ne nipadua mu nhwehwɛmu a etwa to

Ɛnsɛ sɛ wogye tom a etwa to ansa na wɔawie bonding nhyehyɛe no. Ahotew, primer, adhesive anaa ayaresa kwan a wɔde si ananmu hwehwɛ sɛ wɔkyerɛw pene sen sɛ wobesusuw sɛ nneɛma a ɛte sɛ nea ɛte saa ara-yɛ pɛ.

Validate Akenkan Adwumayɛ wɔ Afã horow

RFID akenkan adwumayɛ no nam nneɛma a atwa yɛn ho ahyia a edi mũ no so na ɛba. Syntek akwankyerɛ a ɛfabaabi a wobetumi akenkan RFID tag ahorow akodukyerɛkyerɛ nea enti a antenna, tumi, orientation, frequency ne nneɛma a atwa ho ahyia no nya akenkan beae a wotumi de di dwuma no so nkɛntɛnso.

Ɔfa 1: Fa Pre-Install Baseline si hɔ

Ansa na wode bɛka ho no, si so dua sɛ tag no bua wɔ akenkanfo a wɔapene so no so, ɛsan de EPC a wɔahyɛ da ayɛ no, twa adwuma no soronkoyɛ nhwehwɛmu no mu na ɛne encoding fael no hyia. Kyerɛw memory-lock anaa password nhyehyɛe bere a ɛyɛ nhyehyɛe a wɔapene so no fã nkutoo.

Saa fã yi kyerɛ tag a asɛe anaasɛ wɔamfa encoded a ɛnteɛ ansa na instɔlehyɛn nhyehyɛe no ama diagnosis ayɛ den kɛse.

Afã 2 ne 3: Sɔhwɛ Bere a Wɔakyekyere ne Bere a Wɔde Si Ntwahonan Akyi

Sɛ wowie bond anaa tae-yɛyɛ nhyehyɛe a wɔapene so no a, san yɛ RF ne identity nhwehwɛmu no bio. Hwɛ attachment no mu sɛ ebia ɛrema so, ɛretu anaasɛ asɛe anaa.

Afei sɔ tae-ne-twɛre nhyiamu a wɔde ahyɛ mu na wɔahyɛ mu ma no hwɛ. Rim ne tae nhyehyɛe betumi asesa akenkan kwan ne beae a wotumi de di dwuma, enti ɛsɛ sɛ sɔhwɛ no kora:

• Wheel nneɛma ne nhyiam tebea
• Akenkanfo ne antenna nhyehyɛe
• Transmit-tumi nhyehyɛe
• Akyirikyiri ho nkyerɛkyerɛmu
• Tag ne antenna kwankyerɛ
• Tae a ɛbɛn hɔ, dade ne ananmusifo nnwinnade

Adehwere a ɛba wɔ akwan horow ntam no boa ma wɔtew nea ɛbɛyɛ sɛ ɛde ba no ho. Tag a ɛtwam ansa na bonding nanso ɛdi nkoguo wɔ ɛno akyi no betumi akyerɛ attachment asɛe, material detuning, gyinabea a ɛmfata anaasɛ akenkanfoɔ nhyehyeɛ a wɔasesa.

Ɔfa 4: Pene Akenkan Nsɛntitiriw Biara a Wɔde Di Dwuma So

Nsa akenkan baako a ɛdi mu ntumi mpene portal anaa kar kwan a ɛretu{0}}. Akenkan beae biara hia project-ahwehwɛde pɔtee ma captures a wɔhwehwɛ, akenkan a wɔmpɛ, akwankyerɛ ne backend mmuae.

Syntek asɛm a ɛfaRFID nhyehyɛe no adwumayɛ ho nsɛnkyerɛnnebetumi aboa akuw ma wɔahu nsonsonoe a ɛda akenkan dodow, pɛpɛɛpɛyɛ, latency ne adwumayɛ mu ahotoso mu sen sɛ wɔde akyirikyiri kɛse bedi dwuma sɛ ade biako pɛ a wɔde susuw.

Fa Gye a Wogye Kyerɛwtohɔ a Wɔahyɛ Da Ayɛ Di Dwuma

Ɛsɛ sɛ sɔhwɛ kyerɛwtohɔ kyerɛ nea wɔsɔɔ hwɛe, nea na wɔhwehwɛ sɛ efii mu bae, nea esii ne adanse a ɛfoa gyinaesi no so.

Mfatoho a Wɔde Gye Gye Ntoatoaso

Susuw fleet pilot a ɔde inner-liner patch a wɔapene so redi dwuma ho. Kyerɛwtohɔ no di kan si so dua sɛ daa tag biara a ɛwɔ hɔ dedaw no nyɛ adwuma. Afei ɛde EPC a wɔapaw no bata tae kyerɛwtohɔ no ho, kyere patch ne bonding batches no, na ɛkyerɛw pre-install akenkan.

Sɛ wɔde bonding wie a, wɔsan hwɛ EPC koro no ara na wɔhwɛ honam fam attachment no. Sɛ wɔde ntwahonan no si so wie a, kuw no san de akenkanfo geometry a wɔapene so no san yɛ sɔhwɛ no. Awiei koraa no, wɔkenkan tae no wɔ maintenance-bay gyinabea na ɛsɛ sɛ softwea no kyerɛ kar ne ntwahonan gyinabea a ɛfata.

Saa nnidiso nnidiso yi yɛ kyerɛwtohɔ nhyehyɛe ho nhwɛso, na ɛnyɛ adwumayɛ ho asɛm. Ɛsɛ sɛ pass criteria ankasa no fi adwuma no ho nkyerɛkyerɛmu ne nnwinnade a wɔapene so no mu.

Syntek nkyerɛkyerɛmu a ɛfanea enti a RFID nhyehyɛe sɔhwɛ ho hiade nsɛm foforo a ɛfa ho a wɔde bɛsɔ tag, akenkanfo ne softwea ahwɛ sɛ adwumayɛ kwan biako ma.

Map Identifier no kɔ Tae ne Twɛre no Gyinabea a Ɛteɛ

EPC a wotumi kenkan a ɛbata tae a ɛnteɛ ho no yɛ deployment a entumi nyɛ adwuma. Ɛsɛ sɛ tag no ma safoa a ɛyɛ pintinn, bere a nsiesie, dannan, nhwehwɛmu, mfonini ne nhwehwɛmu data a ɛkɔ akyiri da so ara wɔ akyi.

Kura Tae Baako a Ɛyɛ Active Identity mu

RAIN Alliance akwankyerɛ no kyerɛkyerɛ SGTIN-96 mu sɛ ade soronko a ɛkyerɛ tae a RAIN tumi yɛ adwuma. Ɛsɛ sɛ adwuma no serialization nhyehyɛe no siw EPC ahorow a ɛyɛ abien wɔ adwumayɛbea ahorow, wɔn a wɔde nneɛma ma ne dwumadi ahorow a wɔde besi ananmu no ano.

Asase mfonini ho kyerɛwtohɔ betumi ayɛ:

• EPC ne TID nhwehwɛmu a wɔapene so
• Tae yɛfo, ne mfonini, ne kɛse ne serial anaa production reference
• Kar ID anaa VIN
• Aksel, benkum anaa nifa, ne emu anaa akyi gyinabea abien
• Installation ne assignment bere nsɔano
• Mfiridwumayɛfo anaa adwumayɛbea
• TPMS sensor ID a ɛwɔ baabi a nhyehyɛe ahorow no wɔ abusuabɔ
• Mapping tebea ne abakɔsɛm mu dwumadi ahorow

Ɛsɛ sɛ encoding, retirement ne mapping dwumadie a wɔbɛnya no di adwuma no dwumadie ne akontabuo mmara so. Syntek nsɛm a wɔka faRFID data ahobammɔbetumi aboa nkɔmmɔbɔ a ɛtrɛw a ɛfa identity control ne system permissions ho.

Kora Abakɔsɛm So Bere a Worekyinkyin ne Kar a Wɔde Kɔ baabi foforo no

1. Kenkan tae no ansa na woayi na si kar no ne ntwahonan a ɛreyɛ adwuma no so dua.
2. To anaa kyerɛw bere agyiraehyɛde dedaw no gyinabea dwumadi no.
3. Fa tae no hyɛ beae anaa kar foforo a wɔapene so no.
4. Kenkan tag no bio denam ɔkwan a wɔfa so yɛ adwuma no so.
5. Yɛ dwumadi foforo no na si so dua sɛ gyinabea biako pɛ na ɛyɛ adwuma.
6. Fa dwumadi dedaw no sie sɛ abakɔsɛm.

RFID betumi aboa saa nkwa nna kwan yi wɔ nhwehwɛmu, nneɛma a wɔakora so ne ɔsom adwuma nyinaa mu. Syntek asɛm a ɛfaRFID mfiridwuma a wɔde hwɛ tae sode dwumadie ho nsɛm foforɔ ma.

Manage Repairs, Tag Failure, Sesa ne Retreading

Fa Tae no Abakɔsɛm Sie Bere a Tag Bi Di Adwuma no

Ɛnsɛ sɛ tag a wontumi nkenkan popa tae no nkwa nna ho kyerɛwtohɔ. Fa adanse afoforo a wɔapene so di dwuma de kyerɛ tae no, afei kyerɛw EPC a etwa to a edii nkonim, da a edii huammɔ, ntwahonan no gyinabea, nipadua tebea, akenkanfo nhyehyɛe ne nea wosusuw sɛ ɛde bae.

Sɛ wɔpene tag a wɔde besi ananmu so a:

1. Fa EPC dedaw no kɔ pɛnhyen na siw kwan sɛ ɛnsan nkɔ dwumadie a ɛyɛ nnam mu.
2. Kora tae ho kyerɛwtohɔ ne abakɔsɛm a ɛwɔ hɔ dedaw no so.
3. Fa EPC soronko foforo ma.
4. Fa identifier foforo no bata tae nkwa nna koro no ara ho.
5. Kyerɛw nea enti a wɔde besi ananmu ne mfiridwumayɛfo a ɔwɔ asɛyɛde.
6. San yɛ instɔlehyɛn-tae ne map sɔhwɛ ahorow a wɔhwehwɛ no.

Mfa EPC dedaw no nni dwuma bio esiane sɛ mfitiase tag no ntumi nyɛ ho hwee bio nti.

Validate Repairs ne Retread Processes no wɔ ɔkwan soronko so

Nsiesie anaa retread betumi aka tag gyinabea, patch bond, antenna, tae nhyehyɛe a ɛbɛn anaa akenkan akwankyerɛ. Baabi a adeyɛ no betumi aka tag no, yɛ akenkan a wɔakyerɛw ne honam fam nhwehwɛmu ansa na wɔayɛ oprehyɛn a wɔapene so no ne bere a wɔapene so akyi.

Ɛsɛ sɛ retread nhyehyɛe no kyerɛkyerɛ mu sɛ:

• Casing a ɛba no ho nkyerɛkyerɛmu
• Tag beae a ɛfa buffing ne repair zones ho
• Adeyɛ a wɔapene so a wɔda no adi
• Pre-process ne post{1}}process akenkan sɔhwɛ ahorow
• Nsesae-tag mmara
• Abakɔsɛm-kyerɛwtohɔ a ɛkɔ so
• Casing tebea a wɔapow na wɔakɔ pɛnhyen

Mfa no sɛ embedded anaa aftermarket tag biara bɛtra ase wɔ retread system biara mu. Ɛsɛ sɛ wɔde nhyiamu si hɔ ma tae ankasa, tag ne ɔkwan a wɔfa so yɛ no.

Hwɛ Supplier Nsakrae ne Regression Sɔhwɛ so

Ɛsɛ sɛ nhyehyeɛ a ɛtwam wɔ pilot no mu no bɛyɛ approval baseline. Ɛsɛ sɛ wɔn a wɔde nneɛma ma no bɔ adwuma no amanneɛ ansa na wɔasesa nneɛma anaa akwan a ɛbɛtumi aka identity, RF adwumayɛ, attachment anaa traceability.

Regression sɔhwɛ si so dua sɛ nteɛso anaa nsakrae bi nsɛee adwumayɛ nhyehyɛe bi a na atwam. Sɛ nhwɛsoɔ no, ɛsɛ sɛ wɔhwɛ mapping-software fix bi a ɛfa rotation, kar transfer ne tag sesa ho sen sɛ wɔbɛhwɛ screen a wɔsesaeɛ no nko ara.

Nnwuma a ɛhwehwɛ sɛ wɔyɛ tag nhyehyɛe a wɔayɛ no biako, encoding, serialization ne packaging betumi de nsakrae-asɛm a wɔhwehwɛ wɔ...OEM ne ODM a wɔyɛnkyerɛkyerɛmu a wɔakyerɛkyerɛ mu.

Fa Representative Pilot tu mmirika na Hwɛ Batch no mu

Fa Pilot no Di Dwuma Fa Nsonsonoe no Di Dwuma

Ɛsɛ sɛ wimhyɛnkafo de tebea horow a ɛho hia ma po so ahyɛn no ka ho, na ɛnyɛ tae a ɛyɛ mmerɛw sen biara wɔ adwumayɛbea hɔ nko.

• Ananmusifo a wɔyɛ tae, ne mfonini ne ne kɛse
• Tae foforo ne nea wɔde adi dwuma wɔ baabi a wɔapene so
• Ntwahonan nneɛma a ɛfata ne ntwahonan gyinabea
• Mfiridwumayɛfo anaa adwumayɛbea ahorow a wɔfata ahorow
• Nsaano ne automated akenkan nsɛntitiriw
• Rotation, transfer, repair anaa retread nsɛm a esisi wɔ baabi a ɛfata
• Ahotew, ɔsom ne adwumayɛ mu a wɔda no adi daa

Sua instɔlehyɛn adwuma a wɔsan yɛ, honam fam sintɔ, nkyerɛwde a ɛyɛ abien, post-mount akenkan, akenkan a wɔmpɛ, map pɛpɛɛpɛ ne abakɔsɛm a wɔkora so. Ɛsɛ sɛ wɔde adwuma no mu asiane ne nhyehyeɛ a wɔde bɛkata so na ɛkyerɛkyerɛ dodoɔ ne berɛ tenten a wɔde bɛyɛ nhwehwɛmu no mu sene sɛ wɔbɛsuasua afiri dwumadie foforɔ mu.

Tew Batch Inspection Fi Standards Conformance ho

ISO 20912 ka no pefee sɛ ɛnhyehyɛ mass-production quality-control ahwehwɛde anaa sɔhwɛ mpɛn dodow. Enti ɛsɛ sɛ adetɔ ho nkyerɛkyerɛmu anaa nea wɔde ma no su ho nhyehyɛe no kyerɛkyerɛ nhwehwɛmu a wɔde ba ne nea wɔyɛ mu.

Nhwehwɛmu a wobetumi ayɛ no bi ne:

• Units a efi gyinabea ahorow a wɔyɛ, cartons anaa reels
• EPC soronkoyɛ ne encoding-fael mpata
• TID anaa chip verification wɔ baabi a ɛho hia
• Memory-lock nhyehyeɛ
• Aniwa ne attachment-afã nhwehwɛmu
• RF hwɛ nnwinnade a wɔapene so no so
• Nneɛma a wɔde kyekyere nneɛma nnidiso nnidiso ne dodow
• Batch ne nneɛma a wɔde hwehwɛ nneɛma mu

RAIN Alliance no adwinnadeɛ-supa nhyehyɛeɛ no ka nhyiamu, aba, ahotosoɔ, hwɛbea ne RF adwumayɛ ho asɛm sɛ su pa nsusuiɛ ma RAIN tags. Syntek nsɛm a wɔka fannwinnade a wɔde hwɛ nneɛma a ɛyɛ papanso betumi aboa adetɔnfo-tumi ho nkɔmmɔbɔ.

Installation ne Mapping a Ɛtaa Ntumi Nhu

Pene identity a wɔde ahyɛ mu no so, ɛnyɛ tag no nkutoo.

Adwuma bi a wotumi de ho to so na ɛhwɛ tae ne nea wɔde bata ho no so, ɛkora RF nhyehyɛe a wotumi san yɛ so, ɛhwɛ encoding soronko so, ɛyɛ nea ɛkyerɛ tae no ho mfonini kɔ tae kyerɛwtohɔ a ɛteɛ so na ɛsan sɔ nsakrae ahorow hwɛ wɔ nsiesie, ɛkyinkyini, nsakrae ne retreading nyinaa mu.

Ansa na wobɛka ayɛyɛdeɛ no, siesie tae nhwɛsoɔ, tag ne patch specification, encoding scheme, reader ne antenna nhyehyeɛ, akenkan nsɛntitiriw, mapping fields, sesa-control mmara ne batch{1}}inspection ahwehwɛdeɛ. Enneɛbisa nhwɛsode a wɔde encoded ayɛama validation ne tae ne nhyehyɛe a wɔahyɛ da ayɛ.